Bought a Drone just to create NeRFs with LUMA AI!
TLDRIn this video, the creators share their excitement about owning a drone, specifically the DJI Mini Pro 3, and their intentions to use it for shooting videos around Vancouver to create 3D environments. They unbox the drone, set it up, and venture outdoors for their first test flight, capturing footage at various locations including a sea wall. Despite initial challenges and humorous banter, they successfully capture stunning aerial shots and even attempt to 'nerf' water, which is tricky due to its dynamic nature. The video concludes with the team's enthusiasm for future drone adventures and a teaser for more 3D modeling content to come.
Takeaways
- 🛸 The video discusses the excitement of owning a drone for capturing multiple shots and creating 3D environments.
- 🎥 The creators recently acquired a DJI Mini Pro 3 drone to shoot videos around Vancouver.
- 📦 They unboxed the drone and spent time setting it up and watching tutorials before their first outdoor flight.
- 🚁 The drone's maiden flight took place in a field, where they experienced some initial challenges with control.
- 🌲 The narrator shares a past experience with a toy helicopter that crashed on the first flight.
- 🎬 They aimed to use the drone for shooting footage, not just for fun, and emphasized the importance of the footage over the drone's movements.
- 🌉 The second location for shooting was the sea wall, which offered a different perspective and the opportunity to capture dynamic elements like water and boats.
- 🔍 They experimented with photogrammetry and found that while it's difficult to capture water, Nerf (3D scanning) technology allows it.
- 💻 After returning home, they tested the drone footage in Luma Ai to create 3D models and were satisfied with the results.
- 📍 The video concludes with a promise to explore more landmarks and locations in Vancouver for future Nerf projects.
- 📢 The creators encourage viewers to stay tuned for more drone Nerfing content and to subscribe to their channel.
Q & A
What is the main purpose of owning a drone as mentioned in the script?
-The main purpose is to capture multiple shots and create 3D environments, specifically for shooting videos around Vancouver.
How long ago did the owner acquire the DJI Mini Pro 3 drone?
-The owner got the DJI Mini Pro 3 drone two weeks prior to the events described in the script.
What did the owner do before going outdoors with the drone?
-Before going outdoors, they spent time setting up the drone and watching a few tutorials to understand its operation.
What was the owner's previous experience with drones?
-The owner had a negative experience with a toy helicopter drone that crashed on the first day, but they consider themselves as having professional potential with the new drone.
Where was the first test flight of the DJI Mini Pro 3 conducted?
-The first test flight was conducted in a field.
What was the issue with the drone's initial flight as described in the script?
-The drone was flown too fast and erratically, which was not good for the drone due to the wind, and the pilot was not looking at the screen properly.
What was the second location chosen for drone footage?
-The second location was the sea wall, which was considered the best place for the second Nerf opening.
Why is capturing water with a drone considered tricky?
-Capturing water is tricky because it is dynamic, constantly moving, and may have boats in it, making it difficult for photogrammetry.
What software was used to test the drone footage?
-Luma AI was used to upload and test some of the drone footage to turn them into Nerfs.
What was the outcome of the first attempt at drone Nerfing?
-The first attempt resulted in impressive Nerfs, despite it being their first time using the drone for such purpose.
What is the owner's plan for future drone usage?
-The owner plans to try out different landmarks and locations around Vancouver to create more Nerfs and explore drone Nerfing further.
Outlines
🚁 Unboxing and First Flight with DJI Mini Pro 3
The script describes the excitement of owning a drone for capturing multiple shots and the freedom to practice flying. The narrators unbox the DJI Mini Pro 3 and prepare for their first outdoor flight. They discuss their lack of experience and the potential of using the drone for creating 3D environments. The first test flight in a field is filled with humor and mishaps, as one of them struggles to control the drone, leading to a chaotic and amusing experience. The footage captured is intended for photogrammetry, but the focus is more on the fun of flying rather than the technical aspects.
🌆 Exploring Vancouver with Drone Footage and Nerfing
After the initial flight, the narrators move to the sea wall for a second location shoot. They discuss the challenges of capturing dynamic elements like water with Nerf, which is typically not possible with photogrammetry. The script captures their excitement as they successfully capture footage from a bridge and experiment with Nerfing water, despite its complexities. Back home, they use Luma Ai to test the footage and create Nerfs, showcasing the potential of the drone for creating detailed 3D models. The video ends with a promise to explore more landmarks and locations in Vancouver for future Nerf projects.
Mindmap
Keywords
💡Drone
💡3D Environments
💡Unboxing
💡ASMR
💡Photogrammetry
💡Nerfing
💡Luma Ai
💡Vancouver
💡Test Flight
💡Sony Shot
💡Sea Wall
Highlights
The best thing about owning a drone is the ability to take multiple shots and practice as much as desired.
The group acquired a new drone to capture videos and create 3D environments around Vancouver.
They spent time setting up the drone and watching tutorials to prepare for their first flight.
The drone used is the DJI Mini Pro 3, which they unboxed before their outdoor adventure.
The drone's first flight was in a field, where they experienced some difficulties in controlling it.
The group's goal was not just for fun but to capture footage for creating 3D models.
They moved to a second location, the sea wall, which they believed was ideal for capturing drone footage.
The group attempted to capture dynamic water scenes, which is challenging due to the moving nature of water.
They tested the drone footage in Luma AI to create 3D models and were satisfied with the results.
Despite it being their first time using the drone, they managed to capture footage for 3D modeling.
The group plans to explore different landmarks and locations around Vancouver for more 3D modeling projects.
The video concludes with a call to action for viewers to subscribe for more drone and 3D modeling content.
The drone's ease of use and the quality of the 3D models created were the main points of excitement for the group.
The group's experience with the DJI Mini Pro 3 was positive, and they are looking forward to future projects.
The video showcases the potential of drone technology for creating detailed 3D environments.
The group's humor and camaraderie add a lighthearted tone to the video, making it engaging for viewers.
The video serves as an introduction to drone 3D modeling for those who may be interested in the process.